Technical support: +49 (0)421 57290510



Product description

The SW-20184 solar module is designed for larger solar systems. This powerful 83Wp module is designed for 12V systems, but can be used in a series connection for 24V systems. Depending on the irradiation, the module supplies a charging current of up to 4.3A.
  • 83 Wp output
  • 4.30 A max. charging current
  • 17 - 22 Ah daily yield
  • Incl. cell protector

Average daily yield (May-Sept):
  • North Sea/Baltic Sea approx. 4 x 4.3 => 17 Ah/Day
  • Mediterranean, Caribbean or California => 21 Ah/Day

The base material is made out an aluminum sandwich core. The cells are perfectly supported and protected by new core material. The solar module adapts to curved surfaces, with a maximum curvature of 3 cm/meter of module length.

The modules are designed for harsh marine environments and salt water. The cable outlet is bolted to the support plate and is completely sealed and 100% saltwater proof. By hermetically encapsulating the cells and carrier plate, they are well protected even against aggressive saltwater.

In the solar industry, the solar cell has prevailed with an edge length of 156mm x 156mm during recent years. So far, our basic cell is 100mm x 100mm. In order to be able to manufacture the most powerful cells in the future, we have adjusted all module formats to current cell formats, while reducing their dimensions to the absolute minimum.

Please note that the power output of solar modules comes directly from incident light intensity - not heat - which fluctuates between seasons. For optimal performance, the module should be oriented as perpendicular as possible to the sun and any shade should be avoided.

Technical data:

Designation Value Unit
Pmax 83.0 Wp
Imax 4.10 A
Uoc 24.6 V
Isc 4.30 A
Number of cells 39 Piece
Cell format 78.0 x 156.0 mm
Length 859.0 mm
Width 689.0 mm
Holes 6 x 9.0 mm
System voltage 12.0 V
Base plate 3.0 mm aluminum sandwich
Cable output On front side
Cable 3 x 1.5 mm²
Cable length 3.0 m
Colour White
Net weight 4.7 kg
Gross weight 6.0 kg

Made in Germany!
All SunWare products are developed, tested and produced in Germany. The front covers of the modules also originate from Germany. By doing this, the high quality requirements of this particular product and its materials are assured.


PDF, 370,08 KB
PDF, 37,06 KB
PDF, 24,15 KB
PDF, 480,26 KB

Customers ask customers

Ask other SVB customers who have already purchased this product from us for your experience.

Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone at: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!

Customer ratings

Nobody has rated this product yet

SVB uses Cookies to guarantee you your purchase as simple as possible. Within further usage of our pages, you will accept that we use cookies. Learn more...  Ok