IS35 Digital Gauge
This product is no longer available.
SVB recommends the following for this item
Product details
Simrad IS35 displays (depending on the sensor connected)
Bright, clear, and easily visible day or night, the IS35 offers a smart interface to engine data, fuel efficiency, depth history and more. Connected to your vessel’s NMEA 2000 network, the IS35 automatically detects and displays the most relevant information available on a series of pre-set and user-customisable data pages.
Bright & Clear Colour Display
The IS35 features a 3.5-inch optically bonded LCD display with clear 320x240-pixel resolution and bright LED backlight. White ‘day’ mode provides high brightness and contrast for use in full sunlight, while red ‘night’ mode offers more subtle illumination for use in low-light conditions.
Easy To Use
Data is displayed on the IS35 as a series of pages, with pre-set pages for engine monitoring, fuel economy, cruising, steering, and depth history. A simple four-button interface makes it easy to switch between pages, change brightness quickly to reflect the conditions, and modify other settings on the go.
Easy To Set Up
When connected to the NMEA 2000 network aboard your boat, the IS35 automatically detects other connected equipment including engines; fuel flow, engine temperature, and water pressure sensors; GPS receivers; depth transducers; and much more. The IS35 automatically displays the most relevant information available on its pre-set data pages, eliminating the need for a complicated and time-consuming setup process. The IS35 is designed to fit standard 85mm (3 3/8”) circular cut-outs, for direct replacement of traditional analogue speed or RPM gauges. Surface-mounted, it has a low 8mm profile, matching the stylish Glass Bridge design of our NSS evo2 multifunction displays. The IS35 can also be flush mounted using an optional rear-mounting bracket. Electrical installation is simple, with both power and data over a single NMEA 2000 cable.
Engine Monitoring Page
Monitor critical engine data for one or two engines, including alternator potential, engine temperature and water pressure, hours used, oil pressure and temperature, boost pressure, and trim. The IS35 connects to any marine engine supporting NMEA 2000, and many others via an optional J1939 to NMEA 2000 converter.
Fuel Economy Page
An accurate, real-time view of fuel usage helps to identify your optimal cruising speed and RPM, letting you maximise your engine’s fuel economy and get the most from your fuel budget. With a compatible engine, fuel flow sensors, and tank level sensors, the IS35 can display instantaneous fuel flow, fuel used and remaining, rate of consumption, and fuel economy in miles per gallon.
Dedicated Cruising Page
The IS35’s dedicated cruising page automatically displays the most relevant information for power boating, based on available engine data and speed sensors. Central to the display is an analogue-style RPM display, with support for dual engines. The cruising page also incorporates easy to read bar graphs for trim setting and engine temperature, and digital displays for speed, depth, fuel economy, and fuel flow.
Motor Steering Page
A pre-set steering page provides key navigational information from other NMEA 2000 connected instruments including waypoint position, distance, and time to destination. The IS35’s course deviation indicator (CDI) provides a clear graphical representation of your boat’s distance from its plotted course.
Depth History Page
When networked with an NMEA 2000 depth transducer, or multifunction display with built-in echosounder, the IS35 can show a graphical depth history, with digital displays of current depth and water temperature.
Customise Pages
The IS35 is designed to automatically display the most relevant data available from your vessel’s NMEA 2000 connected engines and sensors. However, you’re free to customise its pre-set data pages to display your choice of information from any NMEA 2000-connected devices aboard. Easily create your own pages incorporating analogue-style gauges, bar graphs, and digital displays, in a variety of layouts, to suit your needs at the helm.
Technical Data:
- Monitoring of engine data from up to two engines
- RPM
- Oil pressure and oil temperature
- Gear data
- Operating hours
- Tank levels
- Fuel consumption
- Trip
- Speed over ground (via GPS)
- Compass heading
- Course over ground (via GPS)
- Water depth
- Water temperature
Bright, clear, and easily visible day or night, the IS35 offers a smart interface to engine data, fuel efficiency, depth history and more. Connected to your vessel’s NMEA 2000 network, the IS35 automatically detects and displays the most relevant information available on a series of pre-set and user-customisable data pages.
Bright & Clear Colour Display
The IS35 features a 3.5-inch optically bonded LCD display with clear 320x240-pixel resolution and bright LED backlight. White ‘day’ mode provides high brightness and contrast for use in full sunlight, while red ‘night’ mode offers more subtle illumination for use in low-light conditions.
Easy To Use
Data is displayed on the IS35 as a series of pages, with pre-set pages for engine monitoring, fuel economy, cruising, steering, and depth history. A simple four-button interface makes it easy to switch between pages, change brightness quickly to reflect the conditions, and modify other settings on the go.
Easy To Set Up
When connected to the NMEA 2000 network aboard your boat, the IS35 automatically detects other connected equipment including engines; fuel flow, engine temperature, and water pressure sensors; GPS receivers; depth transducers; and much more. The IS35 automatically displays the most relevant information available on its pre-set data pages, eliminating the need for a complicated and time-consuming setup process. The IS35 is designed to fit standard 85mm (3 3/8”) circular cut-outs, for direct replacement of traditional analogue speed or RPM gauges. Surface-mounted, it has a low 8mm profile, matching the stylish Glass Bridge design of our NSS evo2 multifunction displays. The IS35 can also be flush mounted using an optional rear-mounting bracket. Electrical installation is simple, with both power and data over a single NMEA 2000 cable.
Engine Monitoring Page
Monitor critical engine data for one or two engines, including alternator potential, engine temperature and water pressure, hours used, oil pressure and temperature, boost pressure, and trim. The IS35 connects to any marine engine supporting NMEA 2000, and many others via an optional J1939 to NMEA 2000 converter.
Fuel Economy Page
An accurate, real-time view of fuel usage helps to identify your optimal cruising speed and RPM, letting you maximise your engine’s fuel economy and get the most from your fuel budget. With a compatible engine, fuel flow sensors, and tank level sensors, the IS35 can display instantaneous fuel flow, fuel used and remaining, rate of consumption, and fuel economy in miles per gallon.
Dedicated Cruising Page
The IS35’s dedicated cruising page automatically displays the most relevant information for power boating, based on available engine data and speed sensors. Central to the display is an analogue-style RPM display, with support for dual engines. The cruising page also incorporates easy to read bar graphs for trim setting and engine temperature, and digital displays for speed, depth, fuel economy, and fuel flow.
Motor Steering Page
A pre-set steering page provides key navigational information from other NMEA 2000 connected instruments including waypoint position, distance, and time to destination. The IS35’s course deviation indicator (CDI) provides a clear graphical representation of your boat’s distance from its plotted course.
Depth History Page
When networked with an NMEA 2000 depth transducer, or multifunction display with built-in echosounder, the IS35 can show a graphical depth history, with digital displays of current depth and water temperature.
Customise Pages
The IS35 is designed to automatically display the most relevant data available from your vessel’s NMEA 2000 connected engines and sensors. However, you’re free to customise its pre-set data pages to display your choice of information from any NMEA 2000-connected devices aboard. Easily create your own pages incorporating analogue-style gauges, bar graphs, and digital displays, in a variety of layouts, to suit your needs at the helm.
Technical Data:
Display resolution | 320 x 240 pixels |
Display type | LED backlit TFT-LCD |
Backlight | Day (white) / Night (red) |
Display size | 89 mm / 3.5" |
Waterproof | to IPX7 |
Operating temperature | -15 °C to +55 °C |
Dimensions | 102 x 122 x 100 mm |
Weight: | 0.28 kg |
Power consumption | 130 mA @ 13.5 V |
Documents
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
-10%
LOWRANCE
GPS antenna POINT-1 with integrated compass
€279.00
only
€251
22
4
-10%
SIMRAD
GS25 GPS Antenna
€279.00
only
€250
38
3
-10%
SECUMAR
Children's Life Jacket ARKONA Midi / 110 N / 20-50 kg
€111.68
only
€100
80
11
ATLAS
Wall Mount for Drinking Water Filter / single housing
only
€4
62
46
NMEA2000
NMEA2000 T-Piece / Micro-C
only
€17
61
> 100
NMEA2000
NMEA2000 Network Cable / Micro-C
from
€20
13
6 variants
NMEA2000
NMEA2000 Starter Kit / Micro-C
only
€109
20
> 100
-8%
SCANSTRUT
DS-H10-BLK Cable Seal / for 6-10 mm
€29.15
only
€26
85
47
-19%
LEWMAR
Portlight / Openable / size 3 / 449 x 191 mm
€508.24
only
€411
72
5
Similar items
ADVANSEA
S400 Multifunctional Instrument
only
€285
67
NEW
KUS
NMEA2000 Multifunctional Instrument KMG-20 / 52 mm / chrome
only
€126
01
NEW
RAYMARINE
Alpha Performance Display / 9''
€1,995.00
only
€1.680
63
NEW
RAYMARINE
Alpha Performance Display / 7''
€1,195.00
only
€1.041
97
VDO
VERATRON VL Flex Battery Monitor IBM Kit
from
€214
24
2 variants
VDO
VERATRON VL Flex Gauge / NMEA2000 / black
only
€112
56
3
VDO
VERATRON VL Flex Gauge / NMEA2000 / white
only
€117
61
2
-10%
VDO
VERATRON VMH 35 Multifunction Instrument / GPS / NMEA2000
€260.46
only
€235
25
7
VDO
Oceanlink TFT Display / NMEA2000
only
€588
19
FURUNO
Instrument / Data Organizer FI-70
only
€449
54
1
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!