YACHTING Yacht Tender 250 / Slatted Floor / 3 Person / 2.5 m
But a successive product is available:
SEATEC YACHTING 250 Tender / slatted floor / 3-person / 2.50 m
SEATEC YACHTING inflatable boats are perfect as tenders for smaller yachts, but can also be used for excursions and fishing trips.
SEATEC YACHTING 250 Tender / slatted floor / 3-person / 2.50 m
SEATEC YACHTING inflatable boats are perfect as tenders for smaller yachts, but can also be used for excursions and fishing trips.
SVB recommends the following for this item
Product details
- Extra wide floor slats
- 3 air chambers for increased safety
- Flush "Halkey Roberts" - valve
- 2 sturdy, collapsible aluminum paddles with plastic sheaths
- 3 towing eyes in the bow area
- 3 carrying handles, two on the stern, one on the bow
- 2 additional carrying ropes on the inside of the stern
- Dual-sided grip cord
- Circumferential baseboard
- Wooden transom with reinforcement for motor mounting
- Bailer in the transom
- Seating board
- Foot pump, carrying bag, repair kit
Colour | sand/white |
Bow form | Modern (MX) |
Slats | Type A in light-grey/white |
Lifeline | 3 rope holders |
Seating board | 1 |
Towing eyes/Transport eyes | 3 / no |
Length | 2.5 m |
Width | 1.56 m |
Length (inner) | 1.53 m |
Width (inner) | 0.68 m |
Tube diameter | 43.5 cm |
Air chambers | 3 sections |
Pack size (L x W x H) | 113 x 60 x 33 cm |
Empty weight | 25,6 kg |
Air pressure | 0.25 bar |
Max. engine power | 4.6 kW / 6 hp |
Max. engine weight | 40 kg |
Recommended shaft length | Short shaft |
Transom height (cm) | 37 cm |
Payload | 440 kg |
Carrying capacity | 3 |
Note regarding the material:
The SEATEC YACHTING tenders are made of a special 5 layer PVC (polyvinyl chloride) material. The base consists of a poly fiber (polyester) fabric lining. The fabric is made of 1100 Decitex and is thus very sturdy. The fabric is lined on the interior and exterior with a so-called adhesive layer. This layer serves as a substrate for the equally double-sided PVC coating. Thanks to the PVC coating, the dinghy is airtight and sturdy. Only first-rate PVC material is used, which has specially been developed for the production of dinghies and has proven its durability for years. The material strength is approx. 0.7 mm and the boat's skin weighs about 850 g/m². The material is made in Germany. Max. tensile force is approx. 2500 N/ 5 cm.
Documents
Accessories
See subsequent models of this product
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .