GTI 30 Antifouling

Highly efficient thin-film antifouling paint with a PTFE base. Thin film anti-fouling does not work by means of emitting active components into the water, but rather by means of an extremely smooth surface, thereby preventing organisms from sticking to it.

The extremely smooth surface is created with the PTFE additive. The antifouling effect is further supported due to the embedded copper in the binding agent. The smooth surface exhibits very low frictional resistance in the water, resulting in higher speeds with lower fuel consumption.

Very well suited for the North Sea, Baltic Sea and inland waters. Not suitable for aluminum boats; Steel boats have to be primed with a bi-component primer (at least 350 μm). GTI 30 is ready-to-use and contains approximately 30% metallic copper powder. Quick-drying, a boat can be launched 5-6 hours after application. SEATEC GTI 30 is compatible with VC-17m and can be applied directly to existing old coatings without primer / adhesive. SEATEC GTI 30 does not contain chlorofluorocarbons. Available colors: copper, red, and black. The final colouring does not develop until some time after immersion.

Coverage: approx. 11m² / litre at a dry film thickness of 10 microns, dry for about 20 minutes (20°C).

Use biocides safely. Always read the label and product information before use.