MENTE MARINE ACS RP Fully Automatic Trim Tab Control System
Article Number
23533
EAN
4050269057983
Model no.
ACS-RP
Description
MENTE MARINE - fully automatic trim tab control system ACS RP
Operating voltage
12 V, 24 V
For boats
4.5 - 12
m
Control
Electric
NMEA2000
No
Operation
Automatic, Manual
Product details
The deep V-hulls of new sportboats have been designed for a smooth ride in rough conditions. The higher the deadrise, the more necessary it is to set the trim tabs for going straight. Rolling and heeling depends on the wind and location of passengers. Pitch is dependent on speed and load.
When changing course, if the wind direction changes, the boat has to be trimmed again, as is also the case should passengers move. Having to constantly adjust the trim to changing loads can distract the boat driver and is a high safety risk, especially at high speed.
An automatic trim system (ACS) means that this task is one less thing to think about. Changes in trim position due to wind, new course or changed seating positions of passengers are automatically compensated for by the system.
The ACS RP (Roll & Pitch) automatically adjusts the boat to an optimal trim position in relation to the roll axis by avoiding heeling. The transverse axis steering improves visibility and makes driving in a half glide possible. Acceleration is also improved.
Suitable for almost all existing trim tab systems!
Function: The operating panel allows you to turn a manual trim system into a fully automatic trim system.
Installation: Replace the existing control unit only with the ACS control unit from MENTE MARINE - connection of 6 cables The installed sensors measure the movement of the boat.
Technical data
- Compatibility (hydraulic trim tabs)
- Bennet, Instatrim QL, Trimmaster, TFX Teleflex, TX Controls
- Compatibility (electromechanic trim tabs)
- Lectrotab, Lenco, Eltrim, Ultraflex, Bennet
- Steering of the rolling and long axles
- Boat length: 15 - 40 foot (4.5 - 12m)
- Trim tab type recognition: automatic
- Sensitivity: automatic, adaptive to the boat type
- Dimensions (WxHxD): 80 x 77.5 x 10 mm
- Waterproof according to IP68
- Operating temperature -10°C - +85°C
- Storing temperature -40°C - +85°C
- Voltage supply: 10 - 30 V DC
- Max. power intake: 18 A (when trim tabs are activated)
- Power intake: 0,02 A (in neutral)
- Registration: CE
Documents
Customers also bought
Similar items
-16%
LENCO
LENCO Electric Dual Trim Tab Kit / without GPS Antenna And Network
€1,891.89
only
€1.596
60
2
-14%
LENCO
Auto Glide Automatic Trim Tab Control / with GPS Antenna and Network
€2,142.45
only
€1.848
70
2
-16%
LENCO
Auto Glide Automatic Trim Tab Control / without GPS Antenna and Network
€1,599.42
only
€1.344
50
3
-21%
LENCO
RetroFit Kit / 12 V Bennett to Lenco Upgrade
€423.30
only
€336
09
4
MENTE MARINE
Fully Automatic ACS A Trim Tab Control
only
€823
49
1
MENTE MARINE
Fully Automatic ACS R Trim Tab Control
only
€546
18
2
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!