MENTE MARINE Fully Automatic ACS R Trim Tab Control
Article Number
23534
EAN
00096962005764
Model no.
ACS-R
Description
MENTE MARINE - Fully Automatic Trim Tab Control System ACS R
Operating voltage
12 V, 24 V
For boats
4.5 - 12
m
Control
Electric
NMEA2000
No
Operation
Automatic, Manual
Product details
The deep V-hulls of modern pleasure boats are designed to allow for a smooth ride in rough water conditions. The deeper the V, the greater need there is to keep the trim tabs straight. The rollers and lateral inclination depend on the wind and the positioning of passengers. The longitudinal tilt (pitch), also called trim, depends on both speed and load.
Course changes will also change wind direction, causing the boat to re-trim. If passengers change their position, the vessel must also be re-trimmed. The need to constantly trim in order to adapt to changing load conditions, places unnecessary stress on the coxswain and therefore represents a safety risk when traveling at high speeds.
The automatic trim system (ACS) takes control of this process for you. Trim changes caused by wind, new courses or the changing seating positions of passengers are automatically compensated for by this system.
The ACS R automatically adjusts the boat into the optimal trim with respect to the rolling axis by eliminating heeling. It is the best choice for small and fast boats with minimal bow rises.
Suitable for almost all existing trim tab systems!
How it works: The switch panel makes a manual trim system into a fully automatic trim system.
Installation: The existing operating unit can only be swapped with the ACS operating unit from Mente Marine - connection of 6 cables. The built-in sensors measure the movements of the boat.
Technical data:
- Compatibility (Hydraulic trim tabs)
- Bennet, Instatrim QL, Trimmaster, TFX Teleflex, TX Controls
- Compatibility (Electro-mechanical trim tabs)
- Lectrotab, Lenco, Eltrim, Ultraflex, Bennet
- Control of roll and longitudinal axis
- Vessel length: 15-40 feet (4.5-12 m)
- Trim tab type detection: Automatic
- Sensitivity: Automatic, adaptive to vessel type
- Dimensions (WxHxD): 80 x 77.5 x 19 mm
- Waterproof: IP68
- Operating temperature: -10°C - +85°C
- Storage temperature: -40° - +85°C
- Power supply: 10-30 V DC
- Max. power consumption: 18A (when the trim tabs are active)
- Power consumption: 0.02A (idle)
- Certification: CE
Documents
Customers also bought
-15%
YACHTICON
AQUA CLEAN without Chlorine / powder
€22.65
from
€19
29
2 variants
-19%
LOFRANS
Windlass X1
€786.05
from
€638
61
4 variants
-16%
GLOMEX
RA135 4-Way Tilt-Base for RA300 Antenna
€27.00
only
€22
65
43
BAVARIA
Flyscreen for Stainless Steel Portlight, 7RE
only
€47
86
BAVARIA
Trim Plate for Skirting Board
only
€48
70
-24%
SEATEC
Gelcoat
€31.89
from
€24
33
2 variants
Similar items
-16%
LENCO
LENCO Electric Dual Trim Tab Kit / without GPS Antenna And Network
€1,891.89
only
€1.596
60
2
-14%
LENCO
Auto Glide Automatic Trim Tab Control / with GPS Antenna and Network
€2,142.45
only
€1.848
70
2
-16%
LENCO
Auto Glide Automatic Trim Tab Control / without GPS Antenna and Network
€1,599.42
only
€1.344
50
3
-21%
LENCO
RetroFit Kit / 12 V Bennett to Lenco Upgrade
€423.30
only
€336
09
4
MENTE MARINE
Fully Automatic ACS A Trim Tab Control
only
€823
49
1
MENTE MARINE
ACS RP Fully Automatic Trim Tab Control System
only
€647
02
1
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!