SVB recommends the following for this item

Product details

TOPLAC 1-component premium high-gloss varnish provides improved UV protection and has improved aesthetics and flow in comparison with other conventional paints. Gloss conservation and non-yellowing quality is almost doubled. TOPLAC can be easily applied using a brush and has improved flow and levelling. Yield: 13.33 m²/litre. Thinner no.1. Different colours available.

Application instructions:

For coated surfaces

In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 280­320 grade (grit) paper.
In poor condition: Remove all previous coatings and prime the surface.

All surfaces: Apply a primer and allow to dry. Abrade with 320-400 grade (grit) paper. Then apply 1-3 coats of Toplac.

Bare wood: Abrade with 80-180 grit sandpaper. Then with 280 grit paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying primer.

Aluminium: : Degrease with solvent or Super Cleaner. Sand well using 60­120 grade (aluminium compatible) paper. Clean thoroughly and allow to dry. Prime with One UP as soon as possible (within 8 hours).

Steel: Degrease with solvent or Super Cleaner. Gritblast to Sa 2½ ­ near white metal surface. If gritblasting is not possible, grind the metal surface with 24­36 grit abrasive discs to a uniform, clean, bright well roughened metal surface (50­75­microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry.

GRP: Degrease with solvent or Super Cleaner. Sand well using 180­220 grade paper. Clean thoroughly and allow to dry. No primer required.

Old / weathered gelcoat: Degrease with thinner or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. To prevent blistering, apply 3 coats of Interprotect. When using Interprotect, a primer must also be painted before using Toplac.

Drying time at 15 °C: 3 hours
Processing time at 15 °C: min. 16 hours
Processing temperature: +5 °C to max. 35 °C

Documents

en-flag Datasheet
PDF, 195,01 KB
en-flag Manual
PDF, 5,86 MB
en-flag Manual
PDF, 175,84 KB
de-flag Datasheet
PDF, 201,42 KB
de-flag Datasheet
PDF, 523,13 KB
de-flag Manual
PDF, 3,12 MB
de-flag Safety datasheet
PDF, 187,42 KB
fr-flag Manual
PDF, 6,08 MB
fr-flag Safety datasheet
PDF, 183,82 KB
it-flag Manual
PDF, 4,48 MB
it-flag Manual
PDF, 2,89 MB
it-flag Safety datasheet
PDF, 180,69 KB
es-flag Safety datasheet
PDF, 181,56 KB
nl-flag Safety datasheet
PDF, 185,42 KB

What other SVB customers have to say

100% real reviews
Maciej Z.
by Maciej Z. Flag of Croatia 2/20/2022 Verified purchase
Toplac for my mahogany boat
I've been using these paints for years. The best choice of all.
steven D.
by steven D. Flag of France 10/23/2017 Verified purchase
very good service and agood product
Camilla K.
by Camilla K. Flag of France 4/20/2017 Verified purchase
Easy to use, nice colour, nice surface, shiny and beautiful.

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Français
  • Flag of Nederlands
  • Flag of Italiano

Technical question

Question:
User image of Don D.
Don D. asked
on Sep 25, 2019
Flag of English Can the TOPLAC High Gloss One-Component Lacquer be used without any colour in order to get a clear and transparent finish?
Answer:
User image of Antonio T.
Antonio T. answered
on Sep 25, 2019
I don't know. I used it in red color or white. It gives a gloss finish.